tailbag/luggage rol waterproof 50 liters black

Description

QBag tail bag waterproof

Waterproof tail bag made out of light, tough, tearproof and completely waterproof .....

Details:

• thanks to its universal fit, it is suitable for almost all motorcycles, scooters, quads
• the long waterproof zipper makes loading comfortable
• air can be drained through the rotary valve for compression when needed
• due to its inserted plate on the bottom, the bag is even stable enough for use on narrow seats and racks. It can also be utilized as a sports bag
• a large waterproof outside pocket offers quick access to important things
• reflectors on back and sides ensure better visibility in the dark
• attachment with four tension belts in sturdy metal carrier with brakes 
• easy transport due to strong solid carrier handles on the right and left side such as a clickable padded shoulder strap away from the two-wheeler
• material: 100% polyester
• also good for other operational purposes where a waterproof bag is needed (on boats, off-road vehicles etc.)

Dimensions (approx.):
up to 50 liters of storage space (fully loaded)
length with/without outside pocket x width x height outside: 35/31x 65.4 x 31 cm
length x width x height main compartment inside: 30 x 63 x 30 cm
length x width x hight outside pocket inside: 4 x 23 x 16 cm
CAUTION: These are not static dimensions – values can change by the respective load and the flexibility of the material!
length zipper of the main compartment: 57 cm
maximum length x width fastening belts: 95 x 2.5 cm
maximum length (diameter with pocket) x width shoulder strap: 215 x 3.8 cm
length x width carrier handles: 13 x 2.5-3.2 mm
weight: 1330 g

Options:

• security lock for securing the bag on the motorcycle (order number 70250500003)
• paint protection film (order number 60470101590 or 60470101790) even protects sensitive parts from coarse dirt
• bags can be fixed on the license bolting thanks to luggage straps (order number 70320000000)

Approval:
tail bags do not need approval; therefore, they do not need any no certification marks, expert assessment or vehicle type approval

Price per piece

Universal assembly tail bags:

• just place the bag on the seat or rack as desired
• always keep a distance of at least 5 cm to the exhaust and its gas flow - this also applies to the bag and belts
• please lay the front straps (to frame tubes, footrest, etc.) in such a way that it does not affect your freedom of movement. Non-loadable parts (such as the tail trim) should not be strained
• tighten it so far that the bag holds its position and can not slip backwards
• search for ideal fortification points on your motorcycle for the rear fastening straps
• mostly, they can be found on a license plate carrier, handles, frame tubes, turn signal receptacles (when they are stable), etc.
• fastening belts can be installed independently on the left or right - they can also be connected if this is not possible. In this way, a continuous strap runs from left to right - mostly the belts can be connected between the
  license plate and the carrier or splash guard
• also the optional carrier towards the rear wheel can be bolted with the license plate (please do not install the belt on the visible side of the license plate as it could get covered) - there are two ideal lashing points 
  make sure that nothing is disconnected or put under tension
• so that the bag is not yet firmly installed, tighten just the two fastening belts
• please check the desired position of the bag again and adjust it if necessary
• tighten all four straps evenly so that the bag is well mounted and doesn't slip
• strap ends need to be secured against flapping
• always increase speed carefully at first rides or with new loads